|












| |
Brompton Luggage, Accessories and Spares
|
Luggage |
|
Price |
|

|
Touring Pannier
Has considerably more capacity than the Cloth Pannier, and a roll-top
system with nylon clips for closing. There are two pockets at the back and
a divider inside. In addition, there are three elasticated net pockets
around the outside, where you can stow the things you need during your
ride. Total internal capacity approximately 28 litres
|
Bag only:
£49
Complete
with frame & rain cover: £65 |
|

|
C Bag
A larger messenger-style bag with a Velcro- and buckle-fastened flap.
The comfortable padded shoulder strap secures neatly when the bag is
fitted to the bike. A multitude of pockets finished with water resistant
zips keep those small essentials safe and dry and a bright lining means an
end to searching for small items in the dark recesses of your bag.
Capacity 22 litres.
|
Bag
only: £65
Complete
with frame & rain cover £80 |
|

|
S Bag
A messenger-style bag which presents a lower profile than the other
options, and offers more compartments to store the paraphernalia of modern
life. Velcro-fastening tabs keep things dry, with clips as well for the
main cover. This is the only front luggage option for the S Type’s lower
handlebars, but can also be used on other Bromptons. Capacity 20 litres.
|
Bag
only: £60
Complete
with frame & rain cover £75
|
|

|
Folding Basket
This is the simplest item of luggage - a large, open-top container,
ideal for shopping. Its shape is maintained by a simple bracing frame
which folds flat for storage. Drainage holes are provided in case of rain.
Capacity 24 litres
|
Bag
only: £21.50
Complete
with frame £40 |
|
Front Carrier block - needed for the
above luggage if not already fitted.
|
£15 |
 |
Rack Sack (Fits on rear of bicycle)
With stiffened sides and built-in Velcro straps to secure it, the Rack
Sack is purpose-designed for the Brompton rear rack, offering a very
secure shower-proof solution. The bag also comes with a shoulder
strap. Capacity 16 litres.
|
£55 |
|
Lighting |
|
|
|

|
Battery Lighting Set
The LED rear lamp with integral reflectors is designed specially for
Brompton and gives a good bright light: this stays fixed to the bike. At
the front is the neat yet powerful S-son 3-LED lamp, easily removed for
folding with a quick-release. Batteries are included.
|
£40 |
 |
Tyre Dynamo Lighting
In this modern system, power comes from the AXA HR-traction dynamo, its
large pulley minimising losses. Lighting comprises a Basta halogen lamp at
the front and the bright Brompton rear stand-light: this stays on for
several minutes after you've stopped - a great safety feature.
|
R version complete with stay £69
L version complete with stay £70.25
E version complete with dynamo brackets £67 |
 |
Hub-dynamo lighting
Expensive, but beautiful; the Son hub is beautifully engineered, highly
efficient, and you can expect years of reliable service. Control is via a
switch on the front lamp; otherwise the lamps are the same as for the tyre
dynamo system.
|
£222 |
|
Also
Available: |
|
|
 |
Folding Left Hand Pedal |
£35.25 |
 |
Tyre Pump
Our high pressure pump with thumb-lock connection is made specially for
Brompton by Zefal. It is fitted as standard to our all-steel bikes, housed
on the rear frame
|
£12.50 |
|
Extended seat pillar (60mm extra length)
|
£14.50 |
|
Titanium extended seat pillar (60mm) |
£91.50 |
|
Telescopic Seat Pillar |
£47.50
|
|
Titanium telescopic seat pillar |
£124.50
|
Spares
We hold a stock of the most commonly-needed spares
and can usually get other parts direct from Brompton within a couple of
days. Click here for diagrams and
part numbers of Brompton spares
Specifications for replacement parts:
Chain
The chain must have the correct number of links for a given sprocket
combination, as set out below. Bear in mind that traditional joining links are
usually unsuitable for use on a Brompton because the pin is too long; instead,
the joint should be made by pressing in the rivet pin. We recommend SRAM PC1
(1/8") and PC10 (3/32") chains.
 | Non-derailleur configurations (1- & 3-speeds)
Size 1/2" x 1/8", max. pin length 8.5mm
98 links on a 50T/13T combination, 96 links on 44T/13T and 44T/14T arrangements. |
 | Derailleur configurations (2- & 6-speeds)
Size 1/2" x 3/32", max. pin length 7.3mm
102 links on a 54T/16T combination, 100 links on a 50T/15T arrangement and 98
links with a 44T/15T set up. |
N.B. The rear sprocket size given is that of the larger, inner sprocket.
Rear sprockets
For geared hubs (to ISO 10230)
 | Non-derailleur configurations (1- & 3-speeds)
1/2" x 13T x 3mm thick (for lower gearing, use a 14T or 15T sprocket) |
 | Derailleur configurations (2- & 6-speeds)
Special Brompton sprockets, 13T and 15T only
|
Chainset (sometimes called a crankset)
We recommend the Stronglight set specified for the Brompton. If you use an
alternative, make sure that it suits the bottom bracket axle (ISO 6695), that it
gives the correct chain line (fig. HK4 in the Owner's Manual) and that the end
of the crank does not clash with any part of the rear frame when the bicycle is
parked.
BB (bottom bracket) cartridge ISO 6695
 | For C-type: Ritmo S x 127mm (5") |
 | For other models: FAG 119mm (4.7") |
Chain tensioner idler sprockets
 | Non-derailleur configurations (1- & 3-speeds)
10 tooth x 3/32" wide at the teeth, x 1/2" wide at the centre,
mounting hole to receive M5 bolt |
 | Derailleur configurations (2- & 6-speeds)
Special flanged Brompton idlers |
Brake pads
Alhonga HJ 454-11
Tyres
Size 16" x 13/8", ETRTO 37-349
Inner tube with Schrader valve
We recommend the special high-pressure Brompton tyres but if you cannot
obtain these choose another reputable make.
Control cables
The cable routing and terminations are critical. For outer cables, the length
and ferrule diameter should be identical to that of the cable originally fitted.
For the front brake cable, the outer must be in two parts of the correct length,
so that the cable gathering ring occupies the right position in the cable
system.
We strongly recommend using cables supplied by BROMPTON; if you have to use
cables from another source, specify low friction cables (PTFE coated inner
cable, lined outer cable) and make sure that lengths are correct to the nearest
2mm.
Dynamo
AXA HR right hand fitting. Other 6v dynamos are also suitable, but you may
need to fit a special slotted stay (available from Brompton).
Front lamp bulb
6 volt x 2.4 watt halogen; take care not to touch the glass when fitting
|